ERGO TPS HYPER FILTRATION BLUE TWIN FILL WHIP PRIME COMPRESSOR RANGE

Compact size, high performance and durability are the main features of ERGO TPS breathing air compressors. They are equipped with four different pumping units all in TPS (Tropical Plus Superdry) version and powered by three-phase electric motors. Compressors are equipped with a panel complete of monitoring system including pressure gauges, autostop with adjustable pressure switch, automatic condensate drain and direction of rotation control. The models of this line have two high pressure hose connections (from 232 to 330 bar) and an increased filtering system with two Hyperfilters. A remote refill panel is available as an optional.

Pumping group 

• Monobloc in aluminum,
• Crankshaft in forged steel
• Forced lubrication on 2nd and 3rd stage cylinders by gear pump
• Oversized interstage cooling pipes
• Forged aluminum connecting rods
• Main roller bearings
• Roller connecting rod bearings
• 1st and 2nd stage cylinders in aluminum with hard nicasil coating
• 2nd and 3rd stage slide guide cylinders in aluminum with hard nicasil coating
• 3rd stage cylinder in special treated steel.
• Stainless steel intake and exhaust valves
• Interstage cooling pipes in stainless steel
• Separator after the 2nd and 3rd stage
• Safety valves after each stage
• Prepared for Hyperfilter filter system
• Oil filtration
• Double final separator

Purification at the highest level. 

Placed after the last compressor separator and before the pressure holding valve, the Hyperfilter purification system enables reliable treatment of the breathing air according to DIN EN 12021¹ when using original filter cartridges. The separator present between the 2nd and 3rd stage of the purification circuit allows to extract the greatest possible humidity. The filtering capacity with inlet air at 20 ° C and 200 bar is 4300 m³.

Electrical cabinet 

• ON / OFF switch with motor protection switch.
• Digital electronic pressure switch that stops the compressor at the final pressure.
• Drainage of all separators between the individual stages and also of the final separator during compressor operation
• Timer for automatic condensate drain.
• Integrated no-load start (automatic drain every time the unit is switched off).
• 5 liter condensate collection tank, with silencer; capacity of about 3 liters, for the ecological disposal of condensate.
• Interstage pressure gauges display the working pressure for the individual compression stages. This pressure information allows you to check the tightness of the valves (inlet and outlet) of each stage and to quickly identify potential sources of failure.

Chassis 

Open frame designed to facilitate maintenance operations and portability. The tilting motor-holder plate ensures constant V-belt tension. The protective casing in thermo-formed material conveys the cooling air on the cylinders and on the inter-stage pipes, guaranteeing a high compression efficiency. The control console equipped with inter-stage pressure gauges, the internal temperature indicator, the alarm presence and incorrect phase sequence, the oil lack alarm and the start stop and manual condensate drain commands allow easy management and maintenance of the compressor.